Water Bottle Manufaturing Machine Cost, Baby Bottle Machine,
Preform Blowing Machine
Why baby bottle machine / one step injection blow molding machine /
reform blowing machine
High-quality production
Bottle screw size of neck and bottle parting line are perfect,
bottle is stronger.
Fully automatic production
No need to remove burrs, no need to transport preform, greatly save
raw material and labor costs.
Energy conservation
No need secondary heating preform,along with energy saving system,
can save about 30% power.
Clean Preform forming& bottle blowing are completed in one machine,
to avoid preform in the process of transportation and pollution.
Machine with a built-in error detection and alarm system, and
display in the manipulation of the screen.
Scrapless process meaning no flash to trim and no regrind
Allows for biaxial orientation for strength and clarity
High quality injection molded neck finish
Appliable Bottle Type:
Cosmetic bottles: mascara bottles, lotion bottles, cream bottles etc
Pharmaceuticals bottles / Medicine bottles: syrup bottles, eye
drops bottles, pills bottles, oral liquid bottles, intravenous drip
bottles etc.
Food and beverage bottles, food and dairy bottles, carbonated drink
bottles, oil bottles, dressing bottles, condiment bottles
Daily use bottles, households bottles, detergent bottles, laundary
bottles, disinfectant bottle, personal care bottles
Baby Feeding bottles
Pesticide bottle
Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) /
PET Preform Manufacturing Machine
| Item | Unit | Machine Type |
| ISB 1100AN-3 |
| Injection Part | Screw Diameter | mm | 50 |
| Screw L/D Ratio | L/D | 24:1 |
| Screw Speed | r/min | 0-150 |
| Theoretical Injection Capacity | cm3 | 481 |
| Injection Pressure | MPa | 176 |
| Max. Hydraulic Pressure | Kg/cm | 140 |
| The Actual Injection Quantity | g(ps) | 452 |
| Oz | 16 |
| Screw Stroke | mm | 245 |
| Clamping Part | Blow Clamping Force | KN | 150 |
| Clamp Tonnage | KN | 600 |
| Wheel Diameter | mm | 1100 |
| Max. Height | PP, PET, PETG, Tritan, PS, PC | mm | 200 |
| PC, PETG, Tritan, PS | mm | 220 |
| Open Vertical Mode Trip | mm | 570 |
| Others | Max. Pump Pressure | MPa | 16 |
| Servo Motor | Kw | 22 |
| Mode Opening/Locking Motor (Double Pump) | Kw | 22 |
| Electric Power | Kw | 12.2 |
| Tank Volume | L | 420 |
| Dimension of Machine | m | 4.5*1.95*3.4 |
| Machine Weight | T | 9 |
--Parameters are subject to change without prior notice.
--Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according
to customers' requirements. |
Injection stretch blow moulding machine is widely used for various
plastic materials and has broad application prospects
This machine adopts the one-step molding processing and applicable
to the thermoplastic materials such as PET, PC, PS, Tritan, PCTG,
PETG, etc. and widely used in manufacture of packaging bottles for
pharmaceuticals, healthcare product and cosmetic industries.
Shapes: cylinder, jar, oblong, square, plain round, wide-mouth,
oval, non-round, ultra-light etc.
Bottles and jars from 5ml right down to 2.5L all fit within its
wide capabilities.
Why JASU Precision Machinery?
We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from
Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D
center.
Obtained a number of technical patents.
Market network throughout the country , and export to many
countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and
able to serve on site and instruct via voice and videos.
Question & Answer
Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer
in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong
Province, China, about 48 minutes by high-speed railway from Hong
Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport
or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both
parties' discussion) and settle the balance payment prior to
delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed
a good reputation among customers from Europe, Russia, Southeast
Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey,
Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India,
Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa,
Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always
attach great importance to quality controlling from the very
beginning to the very end. Our factory has passed ISO and CE
certification. Patents and many other certificates obtained also
tells this.
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support
on installation, adjustment , operation or maintenance, our
engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the
buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.
- We will check and test the machine and send the video to the
customer for reference prior the delivery.
- Attache/send an operational manual in English version with the
shipment.
- To use the machine only need to connect power and connect to the
air supply and water supply according to the manual or video
instructions if requested.
- Service technicians are on call to instruct via voice and videos.
They all hold visa and passport and be able to serve on site.
